Tape Cutting Options

Home > Print Labels > Select a Cut Option > Tape Cutting Options

In the Options table, these visual patterns represent parts of your label, as illustrated in the Example column.

	Print area
	Margin
	Laminate margin

Setting	Description	Example
Small Margin / 小	A margin of 23 mm is printed first, and then each label is printed, leaving a margin of 2 mm before and after the text.	When the label length is approximately 23 mm or more Approximately 23 mm 2 mm When the label length is approximately 23 mm or less Approximately 23 mm 2 mm
Small Margin / 小
Large Margin / 大	The total margin (laminate margin + label margin) is 25 mm either side of the label.	Approximately 23 mm 2 mm
Large Margin / 大		Approximately 23 mm 2 mm
Chain / 省帶	Select this setting when printing several labels with minimum margins. Feed the tape before using the Tape Cutter, otherwise part of the text may get cut off. Do not try to pull the tape as this may damage the Tape Cassette. A margin of 23 mm is printed first, and then each label is printed, leaving a margin of 2 mm before and after the text.	Approximately 23 mm 2 mm Cut Position
No Cut / 不裁切	Select this setting when printing multiple copies of a label, or when using Fabric Iron-On Tapes or other special tapes that cannot be cut by the Tape Cutter of the Label Printer. Feed the tape before using the Tape Cutter, otherwise part of the text may get cut off. Do not try to pull the tape as this may damage the Tape Cassette. When using the special tapes that cannot be cut by the Tape Cutter of the Label Printer, remove the Tape Cassette from the Label Printer and use scissors to cut the tape.	Approximately 23 mm 2 mm
Special Tape / 特別色帶	Select this setting when using special tape.	Approximately 23 mm 2 mm
Special Tape / 特別色帶	Select this setting when using special tape.	Approximately 23 mm 2 mm

When the cut option is set to [No Cut / 不裁切] or [Chain / 省帶], the cut position is set in the middle of printing area after the last label is printed. When [Start feeding? / 要送帶嗎？] appears on the LCD, press OK（執行） to feed the tape. Press to return to the text entry screen.
When the cut option is set to [Small Margin / 小], [Large Margin / 大], or [Chain / 省帶], the message [Cut tape or press Enter to continue. / 裁切並繼續] appears after printing, and the Label Printer enters Cut Pause Mode. By pressing the Tape Cutter Lever, you can cut the tape at the position you set in [Cut Option / 兩端空白].

Related Information

Select a Cut Option

Did you find the information you needed?