Home > Appendix > Optional Accessories > Single Active Docking Station (Optional: PA-CR-002A) > Mount the Single Active Docking Station on the Wall (Optional: PA-CR-002A)
Mount the Single Active Docking Station on the Wall (Optional: PA-CR-002A)
- Affix the Docking Station to the wall using four screws, as shown in the illustration.
- Height: 1.18" (30 mm)
- Width: 1.5" (38.1 mm)
- Make sure you install the Docking Station in the correct direction so that the printer will not fall.
- Use screws with the following dimensions: Length: 0.98 in. (25 mm) or more, Diameter: 0.39 in. (9.8 mm) or less.
Did you find the information you needed?