Search

Site Map

Connect Using RS-232C

  1. Start the BRConfigutation Tool.
  2. Click P-touch Template Settings>Communication Settings.
  3. Set parameters in the Communication Settings window as follows:
    Baud rate
    From 4800 bps to 115200 bps
    Bit Length
    7 bits or 8 bits
    Parity
    None, Odd, or Even
    Busy Control
    DTR or XON/XOFF
    image
    Other settings, such as the baud rate, must be changed in order to use a RS-232C connection. The settings for this printer's serial port are shown in the table above.
  4. Click the Set button to save the parameters.
Related Information
Did you find the information you needed?

find moreaccept