Specifications
Printing
Printing Technology | Direct Thermal |
Print Resolution | 203 dpi / 300 dpi |
Print Speed (depending on the media used) | Maximum 6 ips (152.4 mm/s) *1 |
Maximum Print Width | 2.32" (59 mm) |
Maximum Print Length | 118.11" (3000 mm) |
Size
Weight |
|
Dimensions |
|
Interface
USB | USB Ver.2.0 (Full Speed) (Type C) |
Serial | RS-232C (RJ25) *1 |
Wired LAN (TD-2320D/TD-2350D/TD-2320DF/TD-2350DF/TD-2350DSA) | 10/100BASE-TX |
USB Host Port (TD-2320D/TD-2350D/TD-2320DF/TD-2350DF/TD-2350DSA) | USB Ver.2.0 (Full Speed) (Type A) |
Bluetooth (TD-2350D/TD-2350DF/TD-2350DSA) | Bluetooth Ver5.2 SPP, OPP, HCRP (Bluetooth Classic), GATT (Bluetooth Low Energy) |
Wireless LAN (TD-2350D/TD-2350DF/TD-2350DSA) | IEEE 802.11 a/b/g/n (Infrastructure Mode) IEEE 802.11 g/n (Wireless Direct mode) |
Environment
Operating Temperature | Printer | Between 41°F and 104°F (Between 5°C and 40°C) |
Battery Charger | Between 50°F and 95°F (Between 10°C and 35°C) | |
Operating Humidity | Printer | Between 20% and 80% (without condensation) Maximum wet bulb temperature: 80.6°F (27°C) |
Battery Charger |
Power Supply
Adapter | Standard AC Adapter (100 - 240 V 50/60Hz), Medical AC Adapter (100 - 240 V 50/60Hz) |
Recharging Time | |
Battery Charge And Discharge Cycle Count | Approximately 300 cycles *2 |
Media Specification
The media material may affect print quality.
Media Type | |
Media Width | |
Media Length | Continuous: From 0.25" to 118.11" (6.4 mm to 3,000 mm) Label Peeler: From 0.67" to 118.11" (17 mm to 3,000 mm) Cutter: From 0.79" to 118.11" (20 mm to 3,000 mm) Tear: From 0.71" to 118.11" (18 mm to 3,000 mm) |
Thickness | TD-2310D/TD-2320D/TD-2350D/TD-2350DSA TD-2320DF/TD-2350DF
|
Roll Outside Diameter (maximum) | TD-2310D/TD-2320D/TD-2350D/TD-2350DSA
TD-2320DF/TD-2350DF
|
Core Diameter (minimum) | TD-2310D/TD-2320D/TD-2350D/TD-2350DSA
TD-2320DF/TD-2350DF
|
Media Sensor | Transmissive, Reflective |
Rechargeable Li-ion Battery: Battery Level and Printed Capacity
The following number of pages can be printed, depending on the battery level.
Tested at 73.4 °F (23 °C) using Brother’s print test data 1.97" × 1.18" (50 mm × 30 mm) label with default print density and 11% coverage.
These numbers represent continuous printing when connected via USB and using a new, fully charged battery. Note that the details listed below cannot be guaranteed because of the difference in printing conditions, operating environments, and battery condition.
Battery level: Full | Capable of printing approximately 13,000 sheets |
Compatible Operating Systems
For the latest list of compatible software, visit support.brother.com.