Search

Site Map

Home > Appendix > Specifications

Specifications

Printing

Printing Technology

Direct Thermal

Print Resolution

203 dpi / 300 dpi

Print Speed (depending on the media used)

Maximum 6 ips (152.4 mm/s) *1

Maximum Print Width

2.32" (59 mm)

Maximum Print Length

118.11" (3000 mm)

*1
When using our printing test data <2.28 x 3.94 inches (58 x 100 mm), print coverage 10%> and printing continuously using AC with USB connection in an environment with a temperature of 73.4°F (23℃).

Size

Weight
  • TD-2310D

    Approximately 3.22 lb (1.46 kg)

  • TD-2320D

    Approximately 3.31 lb (1.50 kg)

  • TD-2350D

    Approximately 3.37 lb (1.53 kg)

  • TD-2320DF

    Approximately 3.95 lb (1.79 kg)

  • TD-2350DF

    Approximately 4.01 lb (1.82 kg)

  • TD-2350DSA

    Approximately 3.90 lb (1.77 kg)

Dimensions
  • TD-2310D/TD-2320D/TD-2350D

    Approximately 4.7" (W) x 6.2" (H) x 8.8" (D) (119 mm (W) x 158 mm (H) x 224 mm (D))

  • TD-2350DSA

    Approximately 4.7" (W) x 6.9" (H) x 8.8" (D) (119 mm (W) x 176 mm (H) x 224 mm (D))

  • TD-2320DF/TD-2350DF

    Approximately 4.7" (W) x 6.2" (H) x 10.0" (D) (119 mm (W) x 158 mm (H) x 255 mm (D))

Interface

USB

USB Ver.2.0 (Full Speed) (Type C)

Serial

RS-232C (RJ25) *1

Wired LAN (TD-2320D/TD-2350D/TD-2320DF/TD-2350DF/TD-2350DSA)

10/100BASE-TX

USB Host Port (TD-2320D/TD-2350D/TD-2320DF/TD-2350DF/TD-2350DSA)

USB Ver.2.0 (Full Speed) (Type A)

Bluetooth (TD-2350D/TD-2350DF/TD-2350DSA)

SPP, OPP, HCRP (Bluetooth Classic), GATT (Bluetooth Low Energy)

Wireless LAN (TD-2350D/TD-2350DF/TD-2350DSA)

IEEE 802.11 b/g/n (Infrastructure Mode)

IEEE 802.11 g/n (Wireless Direct mode)

*1
Use a dedicated conversion cable.

Environment

Operating Temperature
Printer

Between 41°F and 104°F (Between 5°C and 40°C)

Battery Charger

Between 50°F and 95°F (Between 10°C and 35°C)

Operating Humidity
Printer

Between 20% and 80% (without condensation)

Maximum wet bulb temperature: 80.6°F (27°C)

Battery Charger

Power Supply

Adapter

Standard AC Adapter (100 - 240 V 50/60Hz)

Recharging Time

Printer recharging: Approximately 2.2 hours *1

Battery charger: Approximately 2.0 hours *1

Battery Charge And Discharge Cycle Count

Approximately 300 cycles *2

*1
When the printer is turned off, a new Rechargeable Li-ion Battery is used, and charged at 73.4°F (23℃).
*2
At 73.4°F (23℃)

Media Specifications

The media material may affect print quality.

Media Type

TD-2310D/TD-2320D/TD-2350D/TD-2350DSA

  • Wristbands *1
  • Continuous
  • Die-Cut
  • Fanfold
  • Perforated
  • Tag *2

TD-2320DF/TD-2350DF

  • Linerless label

Media Width

TD-2310D/TD-2320D/TD-2350D/TD-2350DSA

  • From 0.59" to 2.48" (15 mm to 63 mm) *3
    • Wristbands: From 0.59" to 1.42" (15 mm to 36 mm) *3 *4

TD-2320DF/TD-2350DF

  • 2.28" (58mm), 1.54" (39mm)

Media Length

Continuous: From 0.25" to 118.11" (6.4 mm to 3,000 mm)

Label Peeler: From 0.67" to 118.11" (17 mm to 3,000 mm)

Cutter: From 0.79" to 118.11" (20 mm to 3,000 mm)

Tear: From 0.71" to 118.11" (18 mm to 3,000 mm)

Thickness

TD-2310D/TD-2320D/TD-2350D/TD-2350DSA

  • From 0.002" to 0.011" (0.058 mm to 0.279 mm) *3
    • Peel: From 0.0033" to 0.0051" (0.083 mm to 0.130 mm) *3 *4
    • Tearbar cut: From 0.0023" to 0.0033" (0.058 mm to 0.083 mm) *3 *4
    • Auto cut: From 0.0030" to 0.011" (0.075 mm to 0.279 mm) *3 *4
    • Receipt: From 0.0023" to 0.0035" (0.058 mm to 0.083 mm) *3 *4
    • Label: From 0.0041" to 0.007" (0.104 mm to 0.178 mm) *3 *4
    • Tag: From 0.0052" to 0.0074" (0.133 mm to 0.190 mm) *3 *4
    • Wristband: From 0.0042" to 0.011" (0.107 mm to 0.279 mm) *3 *4

TD-2320DF/TD-2350DF

  • 0.0027" (0.068 mm), 0.0033" (0.086 mm), 0.0037" (0.095 mm)

Roll Outside Diameter (maximum)

TD-2310D/TD-2320D/TD-2350D/TD-2350DSA

  • 5" (127 mm)

TD-2320DF/TD-2350DF

  • 3.15" (80 mm), 4.02" (102 mm)

Core Diameter (minimum)

TD-2310D/TD-2320D/TD-2350D/TD-2350DSA

  • 0.5" (12.7 mm)

TD-2320DF/TD-2350DF

  • 0.98" (25 mm)

Media Sensor

Transmissive, Reflective

Media Roll Winding Direction

Both the outside and inside wound roll media can be used.

*1
Depending on the shape of the wristband, black marks may not be detected by the Reflective/black mark Sensor.
*2
Make sure you use correct media.
*3
Based on catalog specifications.
*4
Values are based on Brother genuine media rolls and PDC wristbands. When exceeding the specified value, confirm the media yourself. The media materials may affect print width.

Rechargeable Li-ion Battery: Battery Level and Printed Capacity

The following number of pages can be printed, depending on the battery level.

  • Tested at 73.4 °F (23 °C) using Brother’s print test data 1.97" × 1.18" (50 mm × 30 mm) label with default print density and 11% coverage.

  • These numbers represent continuous printing when connected via USB and using a new, fully charged battery. Note that the details listed below cannot be guaranteed because of the difference in printing conditions, operating environments, and battery condition.

Battery level: Full

Capable of printing approximately 13,000 labels

Compatible Operating Systems

For the latest list of compatible software, visit support.brother.com.

Related Information
Did you find the information you needed?

find moreaccept