Home > Install Software > Connect the Printer to a Computer > Connect the Printer to a Computer Using a Wired LAN
Connect the Printer to a Computer Using a Wired LAN
To use a static IP address to connect your printer with a wired LAN connection, install the printer drivers and Printer Setting Tool, and then specify the wired LAN connection settings.
Network Cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.
- IMPORTANT
- Do not connect this product to any LAN connection that is subject to overvoltages.
- Make sure the Wireless LAN setting on your printer is turned off.
- If on-screen instructions appear during the installation, make sure the printer is turned off before connecting the LAN cable.
- Connect the LAN cable to the LAN Port on the back of the printer.
- Turn the printer on.
Did you find the information you needed?