Home > Security > Use SSL/TLS > Print Documents Securely Using SSL/TLS > Print Documents Using IPPS
Print Documents Using IPPS
To print documents securely with IPP protocol, use the IPPS protocol.
- Start your web browser.
- Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).For example:
https://192.168.1.2
- If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
For example: https://SharedPrinter
- If you enable a NetBIOS name, you can also use the node name.
For example: https://brn123456abcdef
- The NetBIOS name can be found in the Network Configuration Report.
- If required, type the password in the Login field, and then click Login.The default password to manage this machine’s settings is located on the bottom of the machine and marked "Pwd:". Change the default password by following the on-screen instructions when you first log in. If the Battery Base is installed, uninstall it to confirm the default password.
- In the left navigation bar, click .If the left navigation bar is not visible, start navigating from
.
- Make sure the IPP checkbox is selected.
If the IPP checkbox is not selected, select the IPP checkbox, and then click Submit.
Restart your machine to activate the configuration.
After the machine restarts, return to the machine's web page, type the password, and then in the left navigation bar, click
. - Click HTTP Server Settings.
- Select the HTTPS(Port 443) checkbox in the IPP area, and then click Submit.
- Restart your machine to activate the configuration.
Communication using IPPS cannot prevent unauthorised access to the print server.
Did you find the information you needed?