Home > Create and Print Labels Using Your Computer > Create Labels and Print without Installing Software and Drivers > Print Using a USB Interface (Mass Storage Mode)
Print Using a USB Interface (Mass Storage Mode)
The mass storage feature allows you to send a file to the printer using the USB interface, without installing a printer driver.
This feature is useful for:
- Applying printer settings saved in a command file (BIN file format) and adding templates (BLF file format) into your printer without using any software tools. Both types of files must be distributed by an administrator.
- Executing commands without installing the printer driver.
- Using a device with an operating system (including non-Windows operating systems) supporting a USB host feature to print and transmit data.
- Confirm that the printer is turned off.
- Do one of the following:
- TD-2350D/TD-2350DF/TD-2320DSA/TD-2350DSA: Press and hold OK and
at the same time until the Power LED lights in green and [Mass Storage Mode] appears on the LCD.
- TD-2310D/TD-2320D/TD-2320DF: Press and hold
and
at the same time until the Power LED lights in green.
- Connect the computer or mobile device to the printer via USB.
The printer’s mass storage area appears as a folder on the computer or device's screen.
If the mass storage area does not appear automatically, see the instructions for the operating system of your computer or mobile device for information about accessing the mass storage area. - Drag and drop the file you want to copy to the mass storage area.
- Do one of the following:
TD-2350D/TD-2350DF/TD-2320DSA/TD-2350DSA: Press OK.
The commands in the command file are executed, and the Status LED flashes once in green. When finished, the Power LED lights in green.
TD-2310D/TD-2320D/TD-2320DF: Press
.
The commands in the command file are executed, and the Status LED flashes once in green. When finished, the Power LED lights in green.
- To turn Mass Storage Mode off, turn the printer off.
- NOTE
-
- When the printer is turned off, Mass Storage Mode is deactivated and any files in the mass storage area are deleted.
- This feature supports only BIN, BLF and JPG files.
- Do not create folders in the mass storage area. If a folder is created, files in the folder cannot be accessed.
- Mass Storage maximum capacity is 16 MB.
- If multiple files are copied, the commands may not be executed.
- Only USB connection is available while the printer is in Mass Storage Mode.
- Do not access other files in the mass storage area when executing a copied file.
Did you find the information you needed?