PT-P900W
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/p900weas.jpg)
PT-P900W
Date: 03/12/2019 ID: faqp00100008_001
The label does not cut well.
If the label does not cut well or tape is jammed in the cutter, tape adhesive may have built up on the cutter blades after repeated use. To correct this problem, the tape cutter must be cleaned.
Cleaning the tape cutter
Wipe the cutter blades using a dry cotton swab.
-
Frequent cleaning is recommended.
- Cutter blade
- Cotton swab
-
Metal section
Do not touch the cutter blade with your bare hands.
If the problem still occurs, download and install the latest version of the firmware from the [Downloads] section of this website.
PT-P900W, PT-P950NW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.