QL-580N
FAQs & Troubleshooting |
QL-580N
Date: 10/12/2019 ID: faqp00001444_000
How do I reset network setting?
[QL-580N] | [QL-1060N] |
-
To reset network setting and turn APIPA ON
- Press the ON/OFF button to switch the machine OFF.
- Hold down the ON/OFF button for two seconds.
- Continue holding down the ON/OFF button, and press the CUT button twice.
-
To reset network setting and turn APIPA OFF
- Press the ON/OFF button to switch the machine OFF.
- Hold down the ON/OFF button for two seconds.
- Continue holding down the ON/OFF button, and press the CUT button four times.
APIPA --- If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.1.0 to169.254.254.255.
QL-1060N, QL-580N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.