PT-7500
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/7500eus.jpg)
PT-7500
Date: 05/28/2020 ID: faqp00000060_001
The printed label contains blank horizontal lines.
A horizontal line can be a result of some dust or dirt attached to the surface of the print head.
Clean the print head as follows:
-
Before cleaning the print head, rollers and tape cutter, press the power button (
) to turn off the P-touch, and then disconnect the AC adapter and remove the batteries.
- Do not touch the print head directly with your bare hands. The print head may be hot.
- Turn off the P-touch.
- Disconnect the AC adapter and remove all the batteries.
- Remove the tape cassette.
-
Gently wipe the print head up and down using a dry cotton swab.
-
Use the cotton swab to wipe up and down along each roller while rotating them with your finger.
The print head can be cleaned more easily with the optional print head cleaning cassette (TZ-CL4).
PT-2470, PT-7500, PT-7600
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.