MFC-J805DW(XL)

FAQs & Troubleshooting

MFC-J805DW(XL)

Date: 03/22/2019 ID: faq00000309_514

If the LCD displays [Jam C Rear], follow these steps:

Unplug the machine from the AC power outlet.

IMPORTANT
(MFC-J805DW/MFC-J815DW)
Before you unplug the machine from the power source, you can transfer your faxes that are stored in the machine's memory to your computer or another fax machine so you will not lose any important messages.
Pull the paper tray (1) completely out of the machine.
Pull the two green levers inside the machine to release the jammed paper.

Depending on the paper size, it is easier to remove the jammed paper from the front of the machine rather than from the back of the machine.
Squeeze both levers (1), and then open the Jam Clear Cover at the back of the machine.
Slowly pull the jammed paper out of the machine.
Close the Jam Clear Cover. Make sure the cover is closed completely.
Put the paper tray firmly back in the machine.
While holding the paper tray in the machine, pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
Reconnect the power cord.

Additional paper jam clear operations

If the LCD error message continues to appear and you repeatedly experience paper jams, do the following:

Unplug the machine from the AC power outlet and open the manual feed slot cover.
Load one sheet of thick A4 or Letter sized paper, such as glossy paper, in the manual feed slot. Insert the paper deep into the manual feed slot.
Re-connect the power cord.
The paper you placed in the manual feed slot will be fed through the machine and ejected. If the thick paper is pushing any jammed paper out, remove the jammed paper.

MFC-J805DW(XL), MFC-J815DW XL, MFC-J995DW(XL)

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Very helpful

Helpful

Not helpful

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.