MFC-4820C
FAQs & Troubleshooting |
MFC-4820C
Date: 12/12/2008 ID: faq00000194_003
How can I clear the "PLS OPEN COVER" message from my Fax/DCP/MFC's display?
To clear the message "PLS OPEN COVER" from the display follow the steps listed below:
-
Pull the scanner cover release lever (located on the right-hand side of the machine). This will release the scanner cover, causing it to slightly rise upward.
-
Lift up the scanner cover until it locks into place.
-
Examine the inside of the unit to see if any paper or debris is stuck inside. If you locate any paper of debris inside the machine, remove it.
-
Close the scanner cover and press on both sides until you feel the cover lock back into the closed position.
If you located paper and/or debris inside the Fax/DCP/MFC and removed it and the machine's LCD still reads "PLS OPEN COVER", call Brother Customer Service for assistance.
MFC-4420C, MFC-4820C
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.