MFC-3320CN
FAQs & Troubleshooting |
MFC-3320CN
Date: 05/17/2013 ID: faq00002732_015
Send a fax.
- If you know how to send a fax but are having problems sending, click here.
- If you are using Voice Over Internet Protocol (VoIP), click here.
VoIP is a type of phone system that uses an internet connection instead of a traditional phone line.
- If you are using MagicJack, a popular VoIP service, click here.
- Press the Hook/Hold key and listen for a dial tone.
- If there is dial tone, press the Hook/Hold key again and go to Step 3.
- If there is no dial tone, verify the telephone line cord is directly connected from the Brother machine's LINE jack to the wall telephone jack.
- –If you are using an analog telephone line and there are splitters, commshare devices, power strips, or surge protectors between the wall telephone jack and the Brother machine, please remove them. Removing these devices assists in determining if the issue is related to the device or the Brother machine.
- –If you are using a DSL or Voice Over Internet Protocol (VoIP) telephone system, there can be multiple types of telephone line connections (modems, interface boxes, phone adapters, splitters, etc.). However, a telephone line must be connected to the Brother machine's LINE jack.
- –If you are using an analog telephone line and there are splitters, commshare devices, power strips, or surge protectors between the wall telephone jack and the Brother machine, please remove them. Removing these devices assists in determining if the issue is related to the device or the Brother machine.
- If there is dial tone, press the Hook/Hold key again and go to Step 3.
- If there is still no dial tone, click here.
- Place the document(s) you want to fax face down in the Automatic Document Feeder (ADF) until you feel it touch the roller.
After you put your document(s) in the ADF, the Brother machine's LCD should display the fax-sending options.
- Enter the fax number you want to send to.
- You can manually dial the number or use a One Touch or Speed Dial number.
- Press the Black Start or Color Start key on the machine.
- Your machine will scan and fax the document.
You can press the Stop/Exit key to cancel the fax.
FAX-1920CN, MFC-3320CN
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.