SE-270D

FAQs & Troubleshooting

SE-270D

Date: 04/07/2009 ID: faqh00000010_000

Fabrics and stabilizer material for embroidery

Fabric		Stabilizer material		Reference
Type	Material	Top surface of fabric	Underside of fabric	Reference
Medium weight fabrics Shirt/Apron	Cotton	Not required.	Attach a stabilizer by ironing.
Thick fabrics Jeans/Jumper	Denim Quilting	Not required.	Attach a stabilizer by ironing.	It's better to place a stabilizer material on the top surface of fabric when you sew quilting.
Thin fabrics Curtain/Liner	Georgette Organdy	Place a stabilizer on.	Attach a stabilizer by ironing.	Temperature of iron should be "low".
Stretch fabrics Sweatshirt/Vest	Knit Jersey	Place a stabilizer on.	Attach a stabilizer by ironing.
Towel cloth Towel	Towel (pile)	Place a stabilizer on.	Place a stabilizer material under a fabric without attaching it and then hoop the fabric and the stabilizer together.	Caution: If you attach stabilizer material to towels etc. by ironing, loops of the fabric might be expanded when removing the stabilizer.

Even though "Not required" is mentioned in the above list, use a stabilizer material for more attractive embroidery result if necessary.

Related Models

DZ820E, HE1, HE-120, HE-240, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 2800D, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 4750D, Innov-is 500D, Innov-is 6000D, Innov-is 6700D, Innov-is 6750D, Innov-is 900D, Innov-is 950D, Innov-is 990D, Innov-is BP2100, Innov-is BP2150L, Innov-is VE2200, Innov-is VE2300, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, LB6770/6770PRW, LB-6800, PC-6500, PC-8500/8500D, PE-150V, PE-170D, PE-180D, PE-300S, PE500, PE525, PE540D, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN Lite, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN PLUS2, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, SB7050E, SB7500, SB7900E, SB8000, SE1800, SE-270D, SE-350, SE-400, SE425, ULT2001/2001N/2001C/2002D/2003D

If you need further assistance, please contact Brother customer service:

Go to the Contact Us section

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Very helpful

Helpful

Not helpful

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit