MFC-L8850CDW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcl8850cdw_us_eu_as.jpg)
MFC-L8850CDW
Date: 20/12/2018 ID: faq00000216_025
Colored spots at 94 mm (3.7 in.) intervals or at 30 mm (1.2 in.) intervals
Follow the steps applicable for your case to resolve the issue:
- Case 1: Colored spots at 94 mm (3.7 in.) intervals
- Case 2: Colored spots at 30 mm (1.2 in.) intervals
Case 1: Colored spots at 94 mm (3.7 in.) intervals
- If the issue is not resolved after printing a few blank pages, foreign material, such as glue from a label, may be stuck on the drum surface. Clean the drum unit. Click here to see the details of how to clean the drum unit.
- Install a new drum unit. Click here to see the details of how to replace the drum unit.
Case 2: Colored spots at 30 mm (1.2 in.) intervals
- Identify the color causing the issue and put in a new toner cartridge.
-
To identify the color of the toner cartridge and replace toner cartridge, follow the steps below:
- Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the color causing the problem.
- Replace the toner cartridge of the color. Click here to see the details of how to replace the toner cartridge.
HL-L8250CDN, HL-L8350CDW, MFC-L8850CDW, MFC-L9550CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.