MFC-L8340CDW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/mfcl8340cdw_eu_as.jpg)
MFC-L8340CDW
Date: 23/01/2023 ID: faq00000216_028
Colored spots at 75 mm (3.0 in.) intervals or at 29 mm (1.1 in.) intervals
Follow the steps applicable for your case to resolve the issue:
- Case 1: Colored spots at 75 mm (3.0 in.) intervals
- Case 2: Colored spots at 29 mm (1.1 in.) intervals
Case 1: Colored spots at 75 mm (3.0 in.) intervals
-
If the issue is not resolved after printing a few pages, the drum may have foreign material, such as glue from a label, stuck on the drum surface. Clean the drum unit.
> Click here to see how to clean the drum unit. -
Install a new drum unit.
> Click here to see how to replace the drum unit.
Case 2: Colored spots at 29 mm (1.1 in.) intervals
Identify the color causing the issue and install a new toner cartridge.
To identify the color of the toner cartridge and replace toner cartridge, follow the steps below:
- > Click here to print the chart. [345KB/ PDF]
- Compare your printed document with the printed chart to identify the color causing the issue.
-
Replace the toner cartridge of the color.
> Click here to see how to replace the toner cartridge.
DCP-L3560CDW, HL-L3240CDW, HL-L3280CDW, MFC-L3760CDW, MFC-L8340CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.