MFC-1910W
 |
FAQs & Troubleshooting |
MFC-1910W
Date: 11/05/2020 ID: faq00100029_013
Enable the Brother machine's network interface.
Follow the steps below to enable or disable the Brother machine's network interface.
- Press Menu.
- Press the Up or Down arrow key to select Network, and then press OK.
- Press the Up or Down arrow key to select WLAN, and then press OK.
- Press the Up or Down arrow key to select WLAN Enable, and then press OK.
- Press the Up or Down arrow key to select On or Off.
- Press OK.
- Press Stop/Exit.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Related FAQs
- I can print but cannot scan via network. (For Windows)
- I can print but cannot scan via network. (For Mac)
- The printer status is Offline or Paused.
- "Offline" appears on the Status Monitor.
- My Brother machine could not be found over the network when I installed drivers on my PC.
- I cannot print using my Brother machine on a wireless network (Mac)
- I cannot print using my Brother machine on a wireless network (Windows)
DCP-1610W, MFC-1910W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.