DCP-T420W
FAQs & Troubleshooting |
DCP-T420W
Date: 02/06/2020 ID: faq00100029_026
Enable the Brother machine's network interface.
Follow the steps below to enable the Brother machine's network interface.
-
Press WiFi Button/LED and (Stop) simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the WiFi Button/LED starts blinking. -
Press Black (Mono) Start to enable Wi-Fi.
- When Wi-Fi is enabled, the Power LED blinks once, and then the Power LED and WiFi Button/LED are lit.
- When Wi-Fi is disabled, the Power LED blinks twice, and then the Power LED is lit.
(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.
If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.
Related FAQs
DCP-T420W, DCP-T426W
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.