RJ-4230B
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/rj4230beas.jpg)
RJ-4230B
Date: 26/10/2020 ID: faqp00100037_012
Using the Device Settings (for Windows)
To use the Device Settings, please follow the steps below:
-
Open the Printer Setting Tool.
To learn how to open the Printer Setting Tool, see "Using the Printer Setting Tool (for Windows)".
-
Click the [Device Settings] button.
The [Device Settings] window appears. -
Specify or change the settings.
See below for detailed information.Applying Setting Changes to Multiple Printers
-
Menu Bar
Select a command contained in each menu from the list.
-
Printer
Specifies the printer whose device settings are to be configured.
If only one printer is connected, it is unnecessary to make a selection because only that printer will appear.
-
Settings Tabs
Contains settings that may be specified or changed.If
appears in the tab, the settings in that tab cannot be specified or changed. In addition, the settings in the tab will not be applied to the printer even if [Apply] is clicked. The settings in the tab will also not be saved or exported when the [Save in Command File] or [Export] command is executed.
-
Disable these settings
When this check box is selected,appears in the tab, and the settings can no longer be specified or changed.
Settings in a tab whereappears will not be applied to the printer even if [Apply] is clicked. In addition, the settings in the tab will not be saved or exported when the [Save in Command File] or [Export] command is executed.
-
Current Settings
Retrieves the settings from the currently connected printer and displays them in the dialog box. Settings will also be retrieved for parameters on tabs with.
-
Parameters
Displays the current settings.
-
Exit
Exits [Device Settings], and returns to the main window of the “Printer Setting Tool”.
-
Apply
Applies the settings to the printer.
To save the specified settings in a command file, select [Save in Command File] from the drop-down list.
The saved command file can be used with the mass storage mode to apply the settings to a printer.
To learn how to use mass storage mode, see "How do I switch to and use the mass storage mode?".
[Menu BarBack To Top ]
-
Apply Settings to the Printer
Applies the settings to the printer.
Performs the same operation as when [Apply] is clicked.
-
Check Setting
Displays the current settings.
-
Save Settings in Command File
Saves the specified settings in a command file.
Performs the same operation as when [Save in Command File] is selected from the [Apply] drop-down list.
-
Import
Imports the exported file.
-
Export
Saves the current settings in a file.
-
Save Print Log in File
Saves the print log in a file in the CSV format.
-
Print Unit Settings
Prints a report containing firmware version and device setting information.
You can also print this report using the(Feed) / OK button.
-
Reset to Factory Defaults
Resets all printer settings to factory settings.
-
Reset only Device settings
Resets the settings that can be changed in the Device Settings to factory settings. The templates, databases and print log stored in the printer are not reset.
-
Delete Template and Database
Deletes the templates and databases stored in the printer.
-
Delete Print Log
Deletes the print log stored in the printer.
-
Option Settings
If the [Do not display an error message if the current settings cannot be retrieved at startup] check box is selected, a message will not be displayed next time.
-
About
Displays the version information.
[Back To Top ]
-
Auto Power On
Specifies whether the printer turns on automatically when the AC Power Cord is plugged into an AC power outlet.
Available settings: [On], [Off] -
Auto Sleep
Designates the amount of time to elapse before the Printer automatically goes into sleep mode.
Available settings: [Off], 1/2/3/4/5/6/7/8/9 minutes -
Auto Power Off
Specify the amount of time that passes before the printer turns off automatically.
Available settings: [Off], 10/30 minutes, 1/3/6/9/12 hours -
Battery Charge Level
Specify the maximum charge level.
Available settings: [80 %], [100 %]To get the longest life from the battery, select [80 %]. Although the number of pages that can be printed on a single charge will be less when you select [80 %], you can get a longer overall battery life.
-
Command Mode
Select the printer’s command format.
Available settings: [Raster], [ESC/P], [P-touch Template], [CPCL emulation], [CPCL Line Print emulation]
-
Text Direction
Select the printing orientation.
Available settings: [Normal], [Inverted 180 Degrees]
This setting is applied only if the printer driver is not used. If the printer driver is used, the setting specified in the printer driver will be applied.
-
Print Speed
Select the printer’s printing speed.
Available settings: [3 ips / 76.2 mm/s], [4 ips / 101.6 mm/s], [5 ips / 127 mm/s]
-
Print Density
Adjust the printer’s printing density.
Available settings: -5–+5
-
Align Paper Leading Edge when the Cover is Closed
Select whether the paper is automatically fed when the cover is closed.
Available settings: [Feed], [Do not Feed]
[Back To Top ]
-
Feed Key Function
Select the operation that is performed when the(Feed) / OK button is pressed.
If [Program Settings] is selected, click the [File] button and select the command file.
Available settings: [Feed], [Disable], [Program Settings]
-
Menu Key Function
Select the operation that is performed when the Menu /(Select) button is pressed.
If [Program Settings] is selected, click the [File] button and select the command file.
Available settings: [Menu], [Disable], [Program Settings]
-
Printer Information Report
Select which sections are printed when printing the printer setup information.
Available settings: [All], [Usage Log], [Printer Settings], [Printer Transfer Data]
To learn how to print the printer information, see "Can I print out the printer information?". -
JPEG Printing Setting
Selects the method of image processing when printing JPEG images.
Available settings: [Error Diffusion], [Simple Binary]
-
Serialize Mode
Select whether or not to serialize from the last number printed.
Available settings: [Cont From Last], [From Starting#]
-
Save Printer Print Log
Select whether or not to save the printer’s print log. If [Disable] is selected, [Maintenance] - [Save Print Log in File] cannot be enabled.
Available settings: [Enable], [Disable]
-
Print Data after Printing
Select whether or not print data is erased automatically after it is printed.
Available settings: [Erase All Print Data], [Keep Print Data]
-
Airplane Mode
Disables the Bluetooth® interface. This function is useful when you use the printer in a place where signal transmissions are not allowed.
Available settings: [On], [Off] -
Linerless
Select to enable support for Linerless rolls.
Available settings: [On], [Off]
[Back To Top ]
If RD Rolls are being used, you do not need to adjust the sensors.
-
Printing Reference Point Adjustment Along Label Width / Printing Reference Point Adjustment Along Label Length
Adjust the position of the reference point (point of origin for printing). This corrects printing misalignments resulting from differences in printer models or from the fixed margins of some software.
The reference point cannot be adjusted for raster printing.
Available settings: [Along Label Width]: -5.91 in. to 5.91 in. (-150.0 mm to 150.0 mm), [Along Label Length]: -0.39 in. to 0.39 in. (-10.0 mm to 10.0 mm) -
Tear Adjust
Adjust the tear bar tear off position for paper media.
Available settings: -0.39 in. to 0.39 in. (-10.0 mm to 10.0 mm) -
Media Sensor (Transmissive/Gap)
The following transmissive/gap sensor parameters can be adjusted.
[Detection Sensitivity]
Adjust the precision of the sensor that detects the gaps (spacing) for die-cut labels.
Available settings: -2 – +2
[Luminescence Adjustment]
Adjust the amount of light emitted by the transmissive/gap sensor.
Available settings: -2 – +2
-
Media Sensor (Reflective/Bar)
The following reflective/black mark sensor parameters can be adjusted.
[Mark Detection Sensitivity]
Adjust the precision of the sensor that detects the black marks.
Available settings: -2 – +2
[Luminescence Adjustment]
Adjust the amount of light emitted by the reflective/black mark sensor.
Available settings: -2 – +2
[Display Settings TabBack To Top ]
-
Language
Select the language of the LCD.
Available settings: [Dansk], [Deutsch], [English], [Español], [Français], [Italiano], [Nederlands], [Norsk], [Português], [Suomi], [Svenska], [English], [Español], [Français], [Português], [Deutsch], [Nederlands], [Italiano], [], [
]
The available display languages may differ depending on the printer model being used. If the selected language cannot be used for the LCD, the display language will not be changed.
Make sure that the LCD can display the selected language.
-
LCD Contrast
Select the brightness of the LCD.
Available settings: -2 – +2
-
Backlight Timeout
Specify the amount of time of inactivity that passes before the backlight of the LCD turns off automatically.
Available settings: [Off], [5s], [10s], [20s], [30s], [60s] -
Beeper
Select whether the printer beeps when the(power) button is pressed or any error occurs.
Available settings: [On], [Off]
Applying Setting Changes to Multiple Printers-
After applying settings to the first printer, disconnect the printer from the computer, and then connect the second printer to the computer.
-
Select the newly connected printer from the [Printer] drop-down list.
-
Click [Apply].
The same settings that were applied to the first printer are applied to the second printer.
-
Repeat steps 1 - 3 for all printers whose settings you want to change.To save the current settings in a file, click [File] - [Export].
The same settings can be applied to another printer by clicking [File] - [Import], and then selecting the exported settings file. (See Menu Bar.)
-
Menu Bar
![](/g/b/img/faqend/faqp00100037_012/id/en/1889486/back_to_top.gif)
RJ-4230B
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.