MFC-J1010DW

FAQs & Troubleshooting

MFC-J1010DW

Not your product?

Reset the Network Settings to Factory Default

You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address.

• You can also reset the print server to its factory settings using Web Based Management.

DCP-J1050DW/MFC-J1010DW

DCP-J1140DW

DCP-J1050DW/MFC-J1010DW

1. Press Settings.
2. Press or to make your selections:

   1. Select [Network]. Press OK.
   2. Select [Network Reset]. Press OK.
3. Press for two seconds to confirm.

   The machine restarts.

DCP-J1140DW

1. Press [Settings]>[All Settings]>[Network]>[Network Reset].
2. The reset confirmation message is displayed. Press [OK] for two seconds.

   The machine will restart.

If you need further assistance, please contact Brother customer service:

Content Feedback