DCP-T720DW
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/dcpt720dw_all.jpg)
DCP-T720DW
Date: 28.10.2020 ID: faq00000261_514
Clean the Scanner
- Unplug the machine from the electrical socket.
- Lift the document cover (1). Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth moistened with water.
- In the ADF unit, clean the white bar (1) and the glass strip (2) with a lint-free cloth moistened with water. (ADF models only)
![image](/g/b/img/faqend/faq00000261_514/hk/en/2403877/topic1_icon5.png)
(ADF models only)
If you feel dirt or debris, clean the glass again. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning attempt.
![image](/g/b/img/faqend/faq00000261_514/hk/en/2403878/GUID-F0849165-E677-4112-8F78-407826B9C07C-low.gif)
When there is a spot of dirt or correction fluid on the glass strip, the printed sample shows a vertical line.
![image](/g/b/img/faqend/faq00000261_514/hk/en/2403879/GUID-1FC4A64D-6E6C-413D-9AC1-EC743D563369-low.gif)
After the glass strip is cleaned, the vertical line is gone.
DCP-T520W, DCP-T720DW, DCP-T820DW, MFC-T920DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.