MFC-7820N
FAQs & Troubleshooting |
MFC-7820N
Date: 18/11/2008 ID: faq00000694_001
"Document Jam" error appears on the LCD.
Please follow the steps below.
If the Document is jammed in the top of the ADF unit...
- Take out any paper from the ADF that is not jammed.
- Open the ADF cover
- Pull the jammed document out to the left.
4. Close the ADF cover and press the Stop/Exit key.
If the Document is jammed under the document cover...
- Take out any paper from the ADF that is not jammed.
- Lift the document cover
- Pull the jammed document out to the right.
4. Close the document cover and press the Stop/Exit key.
If the Document is jammed at the output tray...
- Pull the jammed document out to the right.
2. Press the Stop/Exit key.
MFC-7420, MFC-7820N
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.