HL-L3215CW
 |
FAQs & Troubleshooting |
HL-L3215CW
Date: 15/02/2023 ID: faq00100214_011
Reset the Drum Counter
When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
- To avoid print quality issues or damage to the machine, DO NOT reset the drum counter unless you are replacing the drum unit.
- If you reset the drum counter without replacing the drum unit, the machine will not be able to correctly calculate the remaining drum life.
- Make sure the machine is turned on.
- Make sure the machine's cover is closed.
- Press OK and the Up arrow key at the same time.
- Press OK to select Drum.
- Select the toner colour for the drum unit you just replaced, and then press OK.
- Press the Up arrow key to reset the drum counter.
Related FAQs
HL-L3215CW, HL-L3220CW(E), HL-L3240CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.