HL-L9200CDWT
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/hll9200cdwt_us_eu.jpg)
HL-L9200CDWT
Date: 30/10/2018 ID: faq00002477_012
Carry out calibration to improve the colour density
The output density and print position for each colour may vary depending on the machine's environment, such as temperature and humidity.
Calibration helps you improve the colour density.
-
If you print by using the Direct Print feature (supported models only), the Windows printer driver, or the BR-Script printer driver for Windows and Macintosh, click here to see the details of how to perform the calibration from the control panel.
- If you print by using the Macintosh CUPS printer driver, click here to see the details of how to perform the calibration from the Status Monitor.
Calibration from the control panel:
Follow the steps listed below to carry out calibration from the control panel.
-
Press
(Toner).
- Press Calibration.
- Press Calibrate.
- Press Yes to confirm.
- The Touchscreen displays Completed.
-
Press
(Home).
If you print using the Windows printer driver and you still have a print quality issue, check the settings in the Printing Preferences dialog box.
- Access the Printing Preferences dialog box.
-
Click the Advanced tab and click Other Print Options....
-
Choose Colour Calibration in the Printer Function, and make sure that both the Use Calibration Data check box and the Get Device Data Automatically check box are checked.
Calibration from the Status Monitor:
Follow the steps listed below to carry out calibration from the Status Monitor.
-
For OS X v10.7.5 and 10.8.x
- Run System Preferences, choose Print & Scan, and then choose the machine.
- Click Options & Supplies.... Click the Utility tab, and then click Open Printer Utility. The Status Monitor will start up.
For OS X v10.9.x or greater
- Run System Preferences, choose Printers & Scanners, and then choose the machine.
- Click Options & Supplies.... Click the Utility tab, and then click Open Printer Utility. The Status Monitor will start up.
- Now the Status Monitor is turned on.
-
Go to the menu bar, click Control => Colour Calibration.
- The Colour Calibration dialog appears. Read the message and click OK. The machine starts colour calibration and then the printer driver attempts to get the calibration data from the machine.
Related FAQs
HL-L9200CDWT, HL-L9300CDW(TT)
If you need further assistance, please contact Brother customer service:
Content Feedback
Please note this form is used for feedback only.