FAQs & Troubleshooting

Close

MFC-L8850CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-L8850CDW

Not your product?

Date: 20/12/2018 ID: faq00000308_025

Jam Inside

If a paper jam occurs inside of the machine, follow the steps below:

 

  1. Press the front cover release button and pull open the front cover.

      Open_front_cover
  2. Hold the blue handle of the drum unit. Pull the drum unit out until it stops.

      Pull_drum
  3. Turn the blue lock lever (1) at the left of the machine counterclockwise to the release position. Holding the blue handles of the drum unit, lift the front of the drum unit and remove it from the machine.

      Lock_lever_counterclockwise
  4. Pull out the jammed paper slowly.

      Pull_paper
  5. Make sure the blue lock lever (1) is in the release position as shown in the illustration.

      Lock_lever_release_position
  6. Gently slide the drum unit into the machine until it stops at the blue lock lever.

      Slide_drum
  7. Turn the blue lock lever (1) clockwise to the lock position.

      Lock_lever_clockwise
  8. Push the drum unit in until it stops.

      Push_drum
  9. Close the front cover of the machine.

Related FAQs

Related Models

DCP-L8400CDN, DCP-L8450CDW, MFC-L8650CDW, MFC-L8850CDW, MFC-L9550CDW(T)

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.