FAQs & Troubleshooting

Close

HL-J6010DW

FAQs & Troubleshooting

FAQs & Troubleshooting

HL-J6010DW

Not your product?

Date: 01/12/2021 ID: faq00000309_525

Paper is Jammed in the Back of the Machine

If the LCD displays the following paper jam messages, follow these steps:
  • [Jam Rear], [Repeat Jam Rear]
  • [Jam MP Tray], [Repeat Jam MP Tray]
  • [Jam Tray2], [Repeat Jam Tray2]
  1. Unplug the machine from the electrical socket.
  2. If the paper is loaded in the MP tray, remove the paper.
  3. Pull Tray #1 (1) completely out of the machine as shown by the arrow.
    image
    image

    If your LCD displays [Jam Tray2] or [Repeat Jam Tray2], also pull Tray #2 (2) completely out of the machine as shown by the arrow.

    image

    When finished, continue with the next step.

  4. If your LCD displays [Jam Rear], [Repeat Jam Rear], [Jam Tray2], or [Repeat Jam Tray2], do the following:
    1. Open the Jam Clear Cover (1) at the back of the machine.
      image
    2. Slowly pull the jammed paper out of the machine.
      image
    3. Close the Jam Clear Cover. Make sure the cover is closed completely.
      image
  5. If your LCD displays [Jam MP Tray] or [Repeat Jam MP Tray], push the release lever (1) towards the back of the machine, and then slowly pull the jammed paper out of the MP tray.
    image
  6. Using both hands, use the finger holds on each side of the machine to lift the top cover (1) into the open position.
    image
  7. Slowly pull the jammed paper (1) out of the machine.
    image
    image

    If your LCD displays repeat paper jam messages, for example [Repeat Jam Rear], move the print head, and then remove any paper remaining in this area. Make sure pieces of paper are not left in the corners of the machine (1) and (2).

    image

    When finished, continue with the next step.

    IMPORTANT
    • If the print head is in the right corner as shown in the illustration, you cannot move the print head. Close the top cover, and then reconnect the power cord. Open the top cover again, and then hold down image until the print head moves to the centre. Then unplug the machine from the power source and remove the paper.
      image
    • If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head and remove the paper.
    • If ink gets on your skin or clothing, immediately wash it off with soap or detergent.
  8. Gently close the top cover using the finger holds on each side.
    image
  9. Slowly push the paper trays completely into the machine.
    image
  10. Reconnect the power cord.
    image
    If there is a repeat paper jam, a small piece of paper may be stuck in the machine.

    See Related Information: Remove Paper Scraps.

Related FAQs

Related Models

HL-J6010DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.