Search

Site Map

Home > Routine Maintenance > Replace Supplies > Reset the Drum Counter

Reset the Drum Counter

When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
IMPORTANT
DO NOT reset the drum counter unless you are replacing the drum unit.

DCP-L2600D/DCP-L2620DW/DCP-L2622DW/DCP-L2627DW/DCP-L2627DWXL/DCP-L2627DWE/DCP-L2640DN/MFC-L2802DN/MFC-L2800DW/MFC-L2802DW/MFC-L2827DWXL/MFC-L2827DW/MFC-L2835DW

  1. Make sure the machine is turned on.
  2. Make sure the machine's cover is closed.
  3. Press OK and image at the same time.
  4. Press OK to select [Drum].
  5. Press image to reset the drum counter.

DCP-L2660DW/DCP-L2665DW/MFC-L2860DWE/MFC-L2860DW/MFC-L2862DW/MFC-L2922DW/MFC-L2960DW/MFC-L2980DW

  1. Make sure the machine is turned on.
  2. Close the front cover of the machine.
  3. Press image to clear the error.
  4. Press image (Toner) until the touchscreen message changes.
  5. Press [Drum].
  6. Press [Yes].
Related Information
Did you find the information you needed?

find moreaccept