Search

Site Map

Home > Network > Network Features > Reset the Network Settings to Factory Default

Reset the Network Settings to Factory Default

Related Models:ADS‑1350W / ADS‑1800W
You can use your machine's control panel or Web Based Management to reset the machine's network settings to its default factory settings. This resets all information, such as the password and IP address.

ADS-1350W

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the bottom of the machine and marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
  4. In the left navigation bar, click Administrator>Reset Menu.
    image
    If the left navigation bar is not visible, start navigating from image.
  5. In the Network section, click Reset.
    The reset confirmation message appears.
  6. Click Yes to restart your machine.
    image
    To reset the network settings to factory default using machine's control panel, open the Front Cover, and then press and hold image and image simultaneously for five seconds.

ADS-1800W

  1. Press image [Settings]>[Network]>[Network Reset].
    The reset confirmation message appears.
  2. Press [OK] for two seconds.
    The machine will restart.
Related Information
Did you find the information you needed?

find moreaccept