FAQs & Troubleshooting

Close

DCP-T300

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 25/03/2015 ID: faq00002520_018

When I print a document with fast mode, the printing is shifted too high on the paper.

Powder from the paper may build up on the surface of the paper pick-up roller. This may cause the paper to slip as it is picked from the tray. To solve this problem follow the steps below:

  • Clean the paper pick-up roller

     

    1. Unplug the machine from the AC power outlet (electrical socket).
    2. Pull the paper tray completely out of the machine.

      If the machine has feeding multiple pages when there are only a few sheets of paper left in the tray, clean the Base Pad (1) with a soft lint-free cloth moistened with water. After cleaning, wipe the pad with a dry, soft lint-free cloth to remove all moisture.

      CleanBasePad

       

       
    3. Open the Jam Clear Cover (1) at the back of the machine.
      OpenJamClearCover
       
    4. Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth slightly moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
      CleanPaperPickupRoller
       
    5. Close the Jam Clear Cover. Make sure the cover is closed completely.
      JamClearCover
       
    6. Put the paper tray firmly back in the machine.
    7. Re-connect the power cord.

 

  • Flip the paper in the paper tray

    If you are using paper that has a coating on one side (ex. Photo Paper) skip this step.

     
    1. Take the paper out of the tray and fan the stack of paper well.
    2. Install the paper into the paper tray with the other side of paper face up.
    3. Put the paper tray firmly back in the machine.
    4. Start printing again.

 

If you still have a problem after performing the previous steps Brother recommends printing your document at a higher resolution (increased resolutions will print your document at slower speeds).

Related Models

DCP-T300, DCP-T500W, DCP-T700W

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.