FAQs & Troubleshooting

Close

MFC-8890DW

FAQs & Troubleshooting

FAQs & Troubleshooting

MFC-8890DW

Not your product?

Date: 01/28/2009 ID: faq00000195_030

When scanning a document to be copied or faxed, the LCD shows "OUT OF MEMORY". What should I do?

This message means the memory capacity of the unit has been exceeded. The amount of memory used depends on the amount or type of data on the documents being faxed or copied.

If you get an "Out of Memory" message while scanning the first page, press Stop/Exit to cancel scanning.

If you get an "Out of Memory" message while scanning a subsequent page, you can either press Start to transmit or copy the pages that were scanned so far, or press Stop/Exit to cancel the operation.

 


"Out of Memory" message with Fax Storage On? When Fax Storage is set to On,  copies of all received faxes are stored in the memory, thus using up a portion of the memory available for other functions. The Fax Storage feature is utilized for Fax Forwarding, Fax Paging and Remote Retrieval. If you do not need these features, verify that Fax Storage is set to Off by doing the following:

  1. Press Menu.
  2. Press the up or down arrow key to select Fax and press OK.
  3. Press the up or down arrow key to select Remote Fax Opt and press OK.
  4. Press the up or down arrow key to select Fwd/Page/Store or Forward/Store and press OK.
  5. Press the up or down arrow key to select Off and press OK.
  6. If you have faxes stored in the memory, you will receive the following message:

    • Erase All Fax?  1. Yes 2. No
                  --OR--
    • Print All Fax?    1. Yes 2. No

    If you press 1(Yes), faxes in the memory will be erased or printed before the setting changes.
    If a backup copy has already been printed it will not be printed again.

    If you press 2(No), faxes in the memory will not be erased or printed and the setting will be unchanged.

 

If you do need the features that require Fax Storage to be On, the stored faxes will need to be erased or printed to remove them from the memory and to allow additional memory to be available. Follow these steps to print the stored faxes:

  1. Press Menu.
  2. Press the up or down arrow key to select Fax and press OK.
  3. Press the up or down arrow key to select Remote Fax Opt and press OK.
  4. Press the up or down arrow key to select Print Fax or Print Document and press OK.
  5. Press Start.
  6. After printing is finished, press Stop/Exit.

Related Models

MFC-8480DN, MFC-8890DW

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.