QL-720NW
 |
FAQs & Troubleshooting |
QL-720NW
Date: 13/05/2020 ID: faqp00001396_002
Which interface cable can I use?
The following interfaces can be used with your printer.
For Windows users:
-
USB cable
Use the enclosed interface cable.
-
RS-232C cable
Do not use an interface cable that is longer than 6 feet. (2.0 meters)
-
Network cable
Use a straight - through Category5 (or greater) twisted - pair cable for 10BASE - T or 100 BASE - TX FAST Ethernet Network.
For Mac users:
-
USB cable
Use the enclosed interface cable.
-
Network cable
Use a straight - through Category5 (or greater) twisted - pair cable for 10BASE - T or 100 BASE - TX FAST Ethernet Network.
It is not possible to connect RS-232C cable and USB cable to the printer at the same time and use it.
The RS-232C serial connector part of this equipment is not Limited Power Source.
QL-720NW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.