RJ-3035B
FAQs & Troubleshooting |
RJ-3035B
Date: 21/10/2020 ID: faqp00100536_000
The linerless roll is jammed inside the printer and not ejected correctly.
Strongly adhesive linerless rolls may stick to the Linerless Platen and cause a jam inside the printer.
When using the linerless roll, make sure you:
- Have installed the optional Linerless Platen correctly. For more information, contact your local Brother dealer.
- Always test the linerless roll before purchasing a larger quantity to avoid problems with printing and ejection.
-
When installing the linerless roll, always set the roll's adhesive part on the resin part (a) on the lower side of the Platen Roller, as illustrated below, without adhering it.
- After setting the linerless roll, press the Feed button and check that the printer feeds the linerless roll correctly.
RJ-2035B, RJ-3035B
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.