If the APIPA protocol is enabled, the print server will automatically allocate a Link-Local IP address in the range (169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the IP METHOD you have to set.

By default, the APIPA protocol is enabled. You can disable the APIPA protocol using the BRAdmin Professional utility or a web browser.

You can also disable the APIPA protocol using the control panel on the top of the printer. Please follow the steps below:

1. Make sure that the front cover is closed and the power cord is plugged in.

2. Turn on the printer and wait until the printer is in the Ready state.

3. Press any of the Menu buttons (+, -, Set or Back) to take the printer off line.
4. Press + or - until "NETWORK" appears on the LCD display.
5. Press Set to proceed to the next menu level, and then press + or - until "APIPA" appears.
6. Press Set to proceed to the next menu level, and then press + or - to select OFF. The APIPA protocol has been set to be disabled.