HL-3150CDN

FAQs & Troubleshooting

HL-3150CDN

Date: 16/01/2013 ID: faq00000011_034

Check the following points to solve the problem:

To get the best print quality, we suggest using the recommended paper. Check that you are using paper that meets our specifications. Click here to see details of the recommended paper.
The drum units or toner cartridges may not be installed correctly. Check that the drum units or toner cartridges are installed correctly.
- Click here to see how to install the drum unit.
- Click here to see how to install the toner cartridges.
Make sure that the media type setting in the printer driver matches the type of paper you are using.
Check the machine's environment. Conditions such as high humidity can cause hollow print.
Temperature: 10ºC to 32.5ºC (50ºF to 90.5ºF)
Humidity: 20% to 80% (without condensation)
If the problem is not solved after printing a few pages, foreign material, such as glue from a label, may be stuck on the drum surface. Clean the drum unit as follows:
1. Click here to print the chart. [345KB/ PDF]
2. Compare your printed document with the printed chart to identify the color of the drum unit causing the problem.
3. Clean the drum unit of the color. Click here to see how to clean the drum unit.
The drum unit may be damaged. Identify the color causing the problem by using the chart printed in Step 5, and install a new drum unit of the color. Click here to see how to replace the drum unit.

DCP-9015CDW, HL-3150CDN, HL-3170CDW, MFC-9140CDN, MFC-9330CDW, MFC-9335CDW, MFC-9340CDW

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Very helpful

Helpful

Not helpful

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.