FAQs & Troubleshooting

Close

Model discontinued. This page is no longer updated.

HL-1650

FAQs & Troubleshooting

FAQs & Troubleshooting

Date: 26/09/2011 ID: faq00000063_019

Print on envelopes.


Do not use any of the following types of envelopes, as they will cause paper feed problems:

  • Envelopes that are damaged, curled, wrinkled, or irregularly shaped
  • Envelopes that are extremely shiny or highly textured
  • Envelopes with clasps, snaps or tie strings
  • Envelopes with self-adhesive closures
  • Envelopes of baggy construction
  • Envelopes that are not sharply creased
  • Embossed envelopes
  • Envelopes that were previously printed by a laser printer
  • Envelopes that are pre-printed on the inside
  • Envelopes that cannot be arranged uniformly when placed in a pile
  • Envelopes constructed with paper that exceeds the paper weight specifications for the printer
  • Poorly manufactured envelopes with edges that are not straight or consistently square
  • Envelopes with transparent windows, holes, cutouts or perforations.

Before printing envelopes, you must fan the stack of envelopes well to avoid paper jams and misfeeds.

  • Do not load different types of paper at the same time in the paper cassette because paper jams and misfeeds may occur.
  • Do not print on envelopes using 2-Sided(Duplex) printing.
  • For correct printing, you must select the same paper size from within your software application as the paper in the tray.
  • If your application software does not support paper size selection in its print menu, you can change the paper size on the printer's control panel under the PAPER menu.

  1. Open the Multi-purpose tray

     

  2. Unfold the Multi-purpose tray extension.

     

  3. Open the Face up output tray.

     

  4. Place envelopes in the Multi-purpose tray so they touch the back of the tray and remain below the limit mark.

     

    • If you are printing on paper that weighs more than 135 gsm (36 lbs), use the face up output tray.
    • Insert the leading edge of the paper first and push it gently into the tray.
    • The top of the paper stack must be under the guides that are on both sides of the tray. The maximum thickness is 11 mm (0.43 inch).
    • The printed side must be face up.

  5. Press and slide the paper width adjuster to fit the envelope size.

     

    • Make sure that neatly stacked envelopes are correctly seated in the Multi-purpose Tray; otherwise, envelopes may not be fed correctly, resulting in skewed printouts or paper jams.
    • When printing, the inside tray automatically rises to feed envelopes into the printer.

  6. Change the following settings in the printer driver properties tab.

PCL Driver

 

PS Driver

Related Models

HL-1650, HL-1670N

If you need further assistance, please contact Brother customer service:

Content Feedback

To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.