DCP-T710W
![]() |
FAQs & Troubleshooting |
![](/g/b/img/product/dcpt710w_all.jpg)
DCP-T710W
Date: 29/11/2017 ID: faq00002024_016
My Brother machine feeds multiple sheets of paper at a time.
Check the following points to resolve the paper feed issue.
NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.
STEP 1: Make sure the paper is loaded correctly in the paper tray.
-
Do not load the several different kinds of paper.
You cannot load several kinds of paper in the paper tray simultaneously. Remove the different kinds of paper.
-
Ensure the paper do not adhere to each other.
Remove all the paper from the tray and fan the stack of paper well, then put it back in the tray.
-
Ensure the papers do not lift at the back of the tray.
Make sure you do not push the paper in too far. It may lift at the back of the tray and cause paper feed issues. Gently put the paper into the paper tray, and check the paper is flat in the tray.
-
Do not add paper before the tray is empty.
If you want to add more paper before the tray is empty, remove the paper from tray and combine it with the paper you are adding. Always fan the stack of paper well before loading it in the tray.
STEP 2: Make sure the Jam Clear Cover is closed correctly.
Close the Jam Clear Cover. Make sure the cover is closed completely
STEP 3: Make sure the Base Pad in the paper tray is not dirty.
If the machine has been feeding multiple pages when there are only a few sheets of paper left in the tray, clean the Base Pad.
> Click here to see how to clean the base pad.
DCP-T220, DCP-T310, DCP-T420W, DCP-T510W, DCP-T520W, DCP-T710W, DCP-T720DW, DCP-T820DW, MFC-T910DW, MFC-T920DW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.