Innov-is 4000D/4000
FAQs & Troubleshooting |
Innov-is 4000D/4000
Categorised
How-to FAQs
Troubleshooting
Video FAQs
Popular
Updated:25/07/2024
These are the most viewed FAQs, ranked by popularity.
- 1.How to use the Multi-purpose Screwdriver.
- 2.How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
- 3.How to use the Ruffler Foot. (Optional accessory : SA565/ F078) [Video instructions]
- 4.How to use the Open Toe Foot. (Optional accessory : SA186 / F060, SA146 / F026N, SA147 / F027N) [Video instructions]
- 5.How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
Latest
These are the latest FAQs, sorted by last update date.
12/07/2024
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
21/12/2023
How do I raise or lower the feed dogs?
14/12/2022
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
24/09/2020
How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
24/09/2020
How to use the Circular Attachment. (Optional accessory : SACIRC1 / CIRC1) [Video instructions]