FAQs & Troubleshooting
Popular |
HL-L5200DW
214 Results
1.
(Video) Load A4/Letter paper
2.
(Video) Replace the Toner Cartridge
3.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
4.
Update your machine's firmware using Brother iPrint&Scan (Android/iOS)
5.
Replace Drum
6.
(Video) Connect the cord
7.
What is the default password for my Brother network card, BRAdmin, Remote Setup or Web Based Management?
8.
Setup a Brother machine on a wireless (Wi-Fi) network.
9.
My Brother machine could not be found over the network when I installed drivers on my computer.
10.
Reset the Network Settings to the Factory Settings
11.
I cannot print on a wireless (Wi-Fi) network (Windows)
12.
Print on Both Sides of the Paper (Macintosh)
13.
(Video) Unpack your Brother machine
14.
The printer status is Offline or Paused.
15.
I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.
16.
Paper is Jammed inside the Machine
17.
I installed the Full Driver & Software Package, but some applications were not installed. (For Windows 10)
18.
I updated my Windows 11 PC through Windows Update and I can no longer Print, Scan or Fax from my PC.
19.
Print or scan using the Brother iPrint&Scan application for mobile devices (Android/iOS)
20.
Paper is Jammed in the Paper Tray
21.
Toner Low or Prepare New Toner Cartridge
22.
I cannot connect to the printer via Wi-Fi Direct using the Brother Print Service Plugin (Android™ 12 or later).
23.
Paper is Jammed in the 2-sided Tray
24.
Paper is Jammed in the Back of the Machine
25.
Cannot print after a Windows 10 update (June 2020)
26.
Reset the Drum Counter
27.
Print as a Poster (Windows®)
28.
(Video) Set up your Brother machine
29.
Wireless setup is requesting a WPS PIN to complete the setup
30.
How do I use Mopria™ Print Service (MPS) with my Brother machine?