FAQs & Troubleshooting
Popular |
HL-2270DW
214 Results
1.
REPLACE TONER
2.
Configure the Brother machine for a wireless network using automatic wireless mode (Wi-Fi Protected Setup or AOSS™)
3.
JAM REAR
4.
REPLACE DRUM
5.
I cannot connect to the printer via Wi-Fi Direct using the Brother Print Service Plugin (Android™ 12 or later).
6.
The printer status is Offline or Paused.
7.
I cannot repair the wired or wireless connection using the Network Connection Repair Tool (Windows)
8.
JAM INSIDE
9.
The Drum LED is still on or flashing after I replace the drum unit with a new one.
10.
The error message "No Supported Devices Found" appears on the Brother iPrint&Scan screen (mobile device).
11.
What is Brother iPrint&Scan?
12.
Reset the print server to the default factory settings.
13.
Discover the MAC address of the Brother network card
14.
Can I print from and scan to iPhone, iPod touch and iPad?
15.
TONER ENDED
16.
Stop the paper feeding twice through the machine when printing single pages with 2-sided(duplex) switched to on in the printer driver. (For Windows Only)
17.
JAM DUPLEX
18.
CARTRIDGE ERROR
19.
DRUM STOP
20.
Turn the Toner Save Mode on or off.
21.
Use the Network Connection Repair Tool (Windows)
22.
Printing from other applications than the Brother iPrint&Scan when using an Android™ mobile device.
23.
Which connection can I use to print from my device (iPhone, iPod touch, iPad) using the Brother iPrint&Scan?
24.
Printing documents from the Brother iPrint&Scan when using an Android™ mobile device.
25.
DUPLEX DISABLED
26.
TONER LOW
27.
Cannot print after a Windows 10 update (June 2020)
28.
I installed the Full Driver & Software Package, but some applications were not installed. (For Windows 10)
29.
I updated my Windows 11 PC through Windows Update and I can no longer Print, Scan or Fax from my PC.
30.
Unable to print or scan when using Brother iPrint&Scan from my Windows Phone® mobile device.