FAQs & Troubleshooting
Popular |
Innov-is V7
149 Results
1.
Combination of fabric, thread and needle
2.
Fabric and Thread
3.
How to use the Multi-purpose Screwdriver.
4.
When thread got tangled.
5.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
6.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
7.
How to use the Roller Foot. (Optional accessory : SA190 / F066) [Video instructions]
8.
The bobbin thread cannot be pulled up.
9.
Embroidery
10.
How to use the Advanced Monogramming foot "N+" (Optional accessory : SA216 / F087 / F087AP) [Video instructions]
11.
How to use the Pin Tuck Foot. (Optional accessory : SA179 / F058, F059, SA162 / F037N) [Video instructions]
12.
How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
13.
How do I clean the race?
14.
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
15.
Why does the lower thread keep breaking?
16.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
17.
How to use the Ruler Foot for High Shank (Optional accessory : SA218 / F088 / F088AP) [Video instructions]
18.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
19.
How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]
20.
How to use the Braiding Foot. (Optional accessory : SA141 / F021N) [Video instructions]
21.
How do I create a space between characters?
22.
The machine does not make stitches
23.
How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]
24.
How to use the Bobbin Work Kit. (Optional accessory : SABWRK1 / BWRK1) [Video instructions]
25.
How to use the Binding Foot. (Optional accessory : SA109 / F014N) [Video instructions]
26.
How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]
27.
How to use the Narrow Hemmer Foot. (Optional accessory : SA126 / F002N, SA127 / F003N) [Video instructions]
28.
Where do I put the oil in my machine?
29.
"This stitch is not "Dual Feed Mode" compatible." message appears on the LCD. What does it mean?
30.
"OK to delete the setting?" message appears on the LCD. What does it mean?