FAQs & Troubleshooting
Popular |
Innov-is V3 SE
57 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
2.
How to use the Multi-purpose Screwdriver.
3.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
4.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
5.
How do I clean the race?
6.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
7.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
8.
Embroidery
9.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
10.
"Preventive maintenance is recommended" appears on the LCD.
11.
How do I adjust the clock on the display?
12.
How do I attach or remove the Embroidery Unit?
13.
Where do I put the oil in my machine?
14.
How do I change the needle ?
15.
How do I set the bobbin ?
16.
"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
17.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
18.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
19.
Why is the outline sewing off the pattern?
20.
When thread got tangled.
21.
How do I change the volume of operation sounds or alarm sounds?
22.
How do I thread my machine ?
23.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
24.
Why does the lower thread keep breaking?
25.
"This file cannot be used." message appears on the LCD. What does it mean?
26.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
27.
"Failed to save file." message appears on the LCD. What does it mean?
28.
How do I attach or remove the embroidery frame ?
29.
How do I wind the bobbin?
30.
How do I create a space between characters?