1.

It is difficult to pass the thread through the needle bar thread guide(hook).

2.

How do I clean the race?

3.

When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?

4.

Place a spool of thread on a spool pin.

5.

How do I correctly install a bobbin?

6.

How do I adjust a bobbin case using an embroidery pattern?

7.

Embroidery

8.

Upper Threading (Threading the upper thread)

9.

How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?

10.

Upper threading (Point)

11.

Where do I put the oil in my machine?

12.

"Insert an embroidery card." message appearing on the LCD. What does it mean?

13.

How do I wind the bobbin?

14.

"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?

15.

Fabrics and stabilizer material for embroidery

16.

How do I create a space between characters?

17.

"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?

18.

"Cannot sew on this screen." message appearing on the LCD. What does it mean?

19.

How do I attach the embroidery frame?

20.

"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?

21.

"Raise presser foot lever." message appearing on the LCD. What does it mean?

22.

"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?

23.

"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?

24.

"Select a pattern." message appearing on the LCD. What does it mean?

25.

"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?

26.

"The bobbin thread is running out." message appearing on the LCD. What does it mean?

27.

"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?

28.

"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?

29.

"The safety device has been activated." appears on the LCD.

30.

Why does the lower thread keep breaking?