1.

How do I clean the race?

2.

Place a spool of thread on a spool pin.

3.

Why does the lower thread keep breaking?

4.

It is difficult to pass the thread through the needle bar thread guide(hook).

5.

"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?

6.

Embroidery

7.

"Deleting..." message appearing on the LCD. What does it mean?

8.

"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?

9.

Where do I put the oil in my machine?

10.

How do I wind the bobbin?

11.

"The safety device has been activated." appears on the LCD.

12.

When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?

13.

How do I attach the embroidery frame?

14.

How do I save often-used patterns in the machine's memory?

15.

How do I create a space between characters?

16.

"This pattern cannot be used." message appearing on the LCD. What does it mean?

17.

"The bobbin thread is running out." message appearing on the LCD. What does it mean?

18.

"Insert an embroidery card." message appearing on the LCD. What does it mean?

19.

How do I select patterns from the embroidery cards (sold separately)?

20.

Upper threading (Point)

21.

How do I correctly install a bobbin?

22.

How to use the Multi-purpose Screwdriver. [ Position “1” ]

23.

Upper Threading (Threading the upper thread)

24.

"Lower the presser foot lever." appears on the LCD.

25.

"Raise presser foot lever." message appearing on the LCD. What does it mean?

26.

"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?

27.

"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?

28.

"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?

29.

"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?

30.

"Select a pattern." message appearing on the LCD. What does it mean?