FAQs & Troubleshooting
 |
Popular |
Innov-is 700EII
44 Results
1.
Where do I put the oil in my machine?
2.
It is difficult to pass the thread through the needle bar thread guide(hook).
3.
How do I recall a specific embroidery pattern from the computer?
4.
Place a spool of thread on a spool pin.
5.
Embroidery
6.
How do I adjust a bobbin case using an embroidery pattern?
7.
How do I attach the embroidery frame?
8.
How do I clean the race?
9.
How do I confirm Windows®98SE?
10.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
11.
Upper threading (Point)
12.
"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?
13.
When thread got tangled.
14.
Upper Threading (Threading the upper thread)
15.
"Select a pattern." message appearing on the LCD. What does it mean?
16.
"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?
17.
"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?
18.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
19.
"Insert an embroidery card." message appearing on the LCD. What does it mean?
20.
How do I wind the bobbin?
21.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
22.
"Deleting..." message appearing on the LCD. What does it mean?
23.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
24.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
25.
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
26.
How do I select patterns from the embroidery cards (sold separately)?
27.
How do I correctly install a bobbin?
28.
How do I save often-used patterns in the machine's memory?
29.
How do I create a space between characters?
30.
"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?