FAQs & Troubleshooting
Popular |
TJ-4620TN
116 Results
1.
How to connect the printer to your computer
2.
How to download the BMP/PCX file into your printer by the BPM (Brother Printer Management Tool) (for Windows)
3.
How to load the Ribbon
4.
Switch between the wired network and Wi-Fi® network/Bluetooth® connection
5.
How do I connect the printer via Bluetooth®/Wi-Fi®/wired network?
6.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
7.
How to install the Windows driver via Wi-Fi®/ wired network
8.
The printing position of small label is incorrect.
9.
The label is skipped when printing.
10.
How to load the Media
11.
The left or right side of the label is not printed correctly.
12.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
13.
How to set Bluetooth Local Name or PIN code using the BPM (Brother Printer Management Tool) (for Windows)
14.
Using the CommTool (for Windows)
15.
How to update firmware to all printers on the same subnet at the same time
16.
Printing is not possible.
17.
How to skip the AUTO.BAS program only one time by directly operating the printer
18.
How to transfer the print programs or templates using FBPL commands
19.
Enable or disable Bluetooth Low Energy (BLE)
20.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Ribbon" or "Ribbon Encoder Err./Ribbon End Err".
21.
The printed label is wrinkled.
22.
The barcode number is not displayed below the barcode. (P-touch Editor for Windows)
23.
How do I select just certain data (cells) in the Excel spreadsheet to place on the label? (P-touch Editor 5.x for Windows)
24.
How to set the Direct Thermal or Thermal Transfer Print Methods
25.
I cannot install the Windows driver.
26.
The time on the printer is incorrect.
27.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
28.
How to install the Windows driver via Bluetooth®
29.
When printing with the thermal transfer method, the print or cutting position gradually shifts.
30.
How to change the printer code page