FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_ult2001eus.jpg)
ULT2001/2002D/2003D
33 Results
1.
Combination of fabric, thread and needle
2.
Why does the lower thread keep breaking?
3.
When thread got tangled.
4.
Fabric and Thread
5.
Place a spool of thread on a spool pin.
6.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
7.
Where do I put the oil in my machine?
8.
Why does my thread keep jamming?
9.
It is difficult to pass the thread through the needle bar thread guide(hook).
10.
How do I remove the presser foot holder?
11.
Embroidery
12.
How do I create a space between characters?
13.
Sometimes I insert a memory card or floppy disk, touch the appropriate icon, and the ULT screen blanks out, then turns back on.Sometimes the designs come up, but when I choose a design, the screen blanks out. Why is this?
14.
Why is the outline sewing off the pattern?
15.
How do I thread my machine?
16.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
17.
How do I sew an applique?
18.
"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
19.
How do I correctly install a bobbin?
20.
"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
21.
The thread tension is incorrect.
22.
Fabrics and stabilizer material for embroidery
23.
"The foot controller cannot be used when the embroidery unit is attached. Remove the foot controller." message appears on the LCD. What does it mean?
24.
"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
25.
Why does the upper thread keep breaking?
26.
How do I sew a blind hem?
27.
How do I sew such as vinyl, leather, quilting layers and velvet?
28.
"Lower the presser foot lever." appears on the LCD.
29.
Why does the needle keep breaking?
30.
How do I wind the bobbin?