121.

"Data volume is too large for this pattern." message appears on the LCD. What does it mean?

122.

"No more patterns can be added to this combination." message appears on the LCD. What does it mean?

123.

"This pattern cannot be used." message appears on the LCD. What does it mean?

124.

The bobbin thread cannot be pulled up.

125.

High-pitched sound while sewing

126.

How do I retrieve stitch patterns saved in the machine's memory or a USB flash drive?

127.

How to use the memory function to save stitch pattern combinations of decorative stitches

128.

"F01" appears on the LCD. What does it mean?

129.

"Not enough available memory to save." message appears on the LCD. What does it mean?

130.

"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?

131.

How to use the 5 Groove Pin Tuck Foot. (Optional accessory : SA194 / F069) [Video instructions]

132.

How to use the Adjustable Binder Foot. (Optional accessory : SA198 / F071) [Video instructions]

133.

How to use the Fringe Foot. (Optional accessory : SA142 / F025N) [Video instructions]

134.

How to use the Stitch Guide Foot. (Optional accessory : SA160 / F035N) [Video instructions]

135.

How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]

136.

How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]

137.

"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?

138.

"Lower the presser foot lever." message appears on the LCD. What does it mean?

139.

"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." message appears on the LCD.

140.

"Not enough available memory to save the pattern. Delete another pattern?." message appears on the LCD. What does it mean?

141.

"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?

142.

"Check and rethread the upper thread." message appears on the LCD. What does it mean?