1.

It is difficult to pass the thread through the needle bar thread guide(hook).

2.

Place a spool of thread on a spool pin.

3.

"Select a pattern." message appearing on the LCD. What does it mean?

4.

How do I attach the embroidery frame?

5.

"The safety device has been activated." appears on the LCD.

6.

How do I select patterns from the embroidery cards (sold separately)?

7.

Upper Threading (Threading the upper thread)

8.

Upper threading (Point)

9.

When thread got tangled.

10.

"Turn off the machine, and attach the embroidery unit." message appearing on the LCD.What does it mean?

11.

Where do I put the oil in my machine?

12.

"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?

13.

"Raise presser foot lever." message appearing on the LCD. What does it mean?

14.

How do I clean the race?

15.

Embroidery

16.

How do I save often-used patterns in the machine's memory?

17.

"Press the needle position button to raise the needle." message appearing on the LCD. What does it mean?

18.

"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?

19.

"This pattern cannot be used." message appearing on the LCD. What does it mean?

20.

"Saving..." message appearing on the LCD. What does it mean?

21.

"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?

22.

"The bobbin thread is running out." message appearing on the LCD. What does it mean?

23.

How do I wind the bobbin?

24.

"Lower the presser foot lever." appears on the LCD.

25.

How do I create a space between characters?

26.

How do I recall a specific embroidery pattern from the computer?

27.

"Deleting..." message appearing on the LCD. What does it mean?

28.

"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?

29.

"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?

30.

"OK to delete the selected pattern?" message appearing on the LCD. What does it mean?