FAQs & Troubleshooting
Popular |
PE-180D
35 Results
1.
It is difficult to pass the thread through the needle bar thread guide(hook).
2.
Place a spool of thread on a spool pin.
3.
How do I create a space between characters?
4.
Where do I put the oil in my machine?
5.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
6.
"Check if upper or lower thread is cut." message appearing on the LCD. What does it mean?
7.
Why is the outline sewing off the pattern?
8.
How do I wind the bobbin?
9.
"Calculating. Please wait." message appearing on the LCD. What does it mean?
10.
"No more stitches can be combined." message appearing on the LCD. What does it mean?
11.
"This key does not work when needle is at low position. Raise the needle to high position and touch key again." message appearing on the LCD. What does it mean and how do I clear it?
12.
"Embroidery card is not inserted. Turn off main power and insert card." message appearing on the LCD. What does it mean?
13.
"Select pattern." message appearing on the LCD. What does it mean?
14.
Embroidery
15.
Upper threading (Point)
16.
How do I correctly install a bobbin?
17.
Upper Threading
18.
How do I use the needle threader?
19.
"Complete pattern entry." message appearing on the LCD. What does it mean?
20.
"Embroidery pattern is exceeding sewing area." message appearing on the LCD. What does it mean?
21.
"Raise the presser foot and re-thread." message appearing on the LCD. What does it mean and how do I clear it?
22.
"No pattern is memorized." message appearing on the LCD. What does it mean?
23.
When thread got tangled.
24.
"Lower the presser foot lever." appears on the LCD.
25.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
26.
"Winding bobbin thread." message appearing on the LCD. What does it mean?
27.
"Saving" message appearing on the LCD. What does it mean?
28.
"Calculating cannot be done halfway through." message appearing on the LCD. What does it mean?
29.
"Color cannot be changed halfway." message appearing on the LCD. What does it mean?
30.
"Raise the needle to high position." message appearing on the LCD. What does it mean?